IBS Magnet - German
IBS Magnet - English
0
  article(s) | €  
0,00

Disc-type holding magnets (SmCo und NdFeB)

with very strong holding force
The holding magnets have a pot-shaped, flat iron surface as turned part. Consequently the holding force is concentrated onto the holding surface and the magnetic effect is shielded toward the other sides. The surface is electroplated with nickel. The disc-type holding magnets are completely resistant to demagnetising forces and do not suffer any reduction of the holding force with ageing.
PRODUCT DESCRIPTION

The holding magnet surfaces are supplied by us with and without a threaded hole. (Type series FB... and FD...). The cover variations are fitted with two different high-energy materials.

DeltaMagnet (SmCo)
Continuous operating temperature 160 °C, for a short time even up to 200 °C, slight reduction of holding force as a result of temperature influence. Holding area resistant to corrosion without surface treatment.

NeoDeltaMagnet (NdFeB)
Continuous operating temperature 80 °C, for a short time even up to 100 °C. Holding force reduction at 80 °C, approx. 15%, reversible.

Corrosion may occur if there are scratches in the electroplated magnet surface or if used in moist conditions.

Tolerances: After DIN 7168 average, deviating dimension H ± 0.2 mm general for all types.

Disc with threaded hole = Types FB..Disc without threaded hole = Types FD.. / HN..
Version
DeltaMagnet
(SmCo)
Type
Version
NeoDeltaMagnet
(NdFeB)
Type
Dimensions in mmHolding force *
withwithoutwithwithout     SmCo
N
NdFeB
N
threaded holethreaded holeD ØHLGd Ø
FB01FD01FB01NFD01N6,04,511,5M36,05,05,0
FB02FD02FB02NFD02N8,04,511,5M36,09,010,0
FB03FD03FB03NFD03N10,04,511,5M36,012,015,0
FB04FD04FB04NFD04N13,04,511,5M36,040,060,0
FB05FD05FB05NFD05N16,04,511,5M48,060,095,0
FB06FD06FB06NFD06N20,06,013,0M48,090,0140,0
FB07FD07FB07NFD07N25,07,014,0M48,0150,0200,0
FB08FD08FB08NFD08N32,07,015,0M510,0220,0350,0
 HN06  6,04,0   5,0 
 HN10  10,05,0   12,0 
 HN13  13,05,0   40,0 
 HN17  17,55,0   60,0 
 HN25  25,09,0   160,0 
All dimensions in mm.

* The holding forces are minimum values which are reached when the magnet rests directly on the surface of a low carbon steel part, e.g. St 37, with zero air gap and is lifted off vertically. The displacement force is, depending on the nature of the surface, around 20 - 35% of the holding force.
ORDER LIST
Prices /pc. ex works Berlin plus packing, VAT only in Germany
(A = Please ask for price)
Catalogue page Type 1 - 19 20 - 49 50 - 99 100 - 199 200 - 499 500 - 1000  
 22  FB01   4.15  3.80  2.95  2.30  1.80  A    Add to shopping cart   
 22  FB01N   4.15  3.80  2.95  2.30  1.80  A    Add to shopping cart   
 22  FB02   4.85  4.05  3.60  2.85  2.40  A    Add to shopping cart   
 22  FB02N   4.55  4.05  3.60  2.85  2.45  A    Add to shopping cart   
 22  FB03   6.90  5.35  4.40  3.50  2.65  A    Add to shopping cart   
 22  FB03N   6.90  5.35  4.40  3.40  2.55  A    Add to shopping cart   
 22  FB04   8.10  5.80  5.00  4.50  3.80  A    Add to shopping cart   
 22  FB04N   8.10  5.50  4.90  4.40  3.60  A    Add to shopping cart   
 22  FB05   9.90  6.90  5.80  5.20  4.50  A    Add to shopping cart   
 22  FB05N   9.60  6.60  5.70  4.95  4.20  A    Add to shopping cart   
 22  FB06   11.70  8.60  7.60  6.10  4.85  A    Add to shopping cart   
 22  FB06N   11.10  8.15  7.20  5.90  4.60  A    Add to shopping cart   
 22  FB07   17.90  14.30  11.70  9.70  8.60  A    Add to shopping cart   
 22  FB07N   16.95  13.80  11.10  9.00  5.90  A    Add to shopping cart   
 22  FB08   24.00  18.60  15.30  13.00  11.00  A    Add to shopping cart   
 22  FB08N   23.50  18.00  14.80  12.90  10.50  A    Add to shopping cart   
 22  FD01   3.80  3.50  2.80  2.20  1.65  A    Add to shopping cart   
 22  FD01N   3.50  3.00  2.40  2.00  1.30  A    Add to shopping cart   
 22  FD02   4.60  3.80  3.50  2.70  2.30  A    Add to shopping cart   
 22  FD02N   4.60  3.70  3.10  2.70  2.20  A    Add to shopping cart   
 22  FD03   6.65  5.20  4.10  3.20  2.45  A    Add to shopping cart   
 22  FD03N   6.50  5.00  4.05  3.00  2.40  A    Add to shopping cart   
 22  FD04   7.90  5.60  4.80  4.30  3.60  A    Add to shopping cart   
 22  FD04N   7.80  5.40  4.70  4.00  3.10  A    Add to shopping cart   
 22  FD05   9.70  6.50  5.40  4.90  4.30  A    Add to shopping cart   
 22  FD05N   9.40  6.20  5.10  4.20  3.80  A    Add to shopping cart   
 22  FD06   11.50  8.40  7.40  5.80  4.60  A    Add to shopping cart   
 22  FD06N   11.40  8.20  7.10  5.40  4.10  A    Add to shopping cart   
 22  FD08N   22.50  17.90  13.90  11.90  11.40  A    Add to shopping cart   
 22  FD07   17.60  14.00  11.50  9.40  8.40  A    Add to shopping cart   
 22  HN06   3.80  3.70  2.80  2.20  A  A    Add to shopping cart   
 22  FD07N   17.10  13.90  11.00  9.10  7.90  A    Add to shopping cart   
 22  HN10   6.30  5.10  4.20  3.40  A  A    Add to shopping cart   
 22  FD08   23.00  18.00  14.00  12.00  11.60  A    Add to shopping cart   
 22  HN13   7.10  5.30  4.80  4.30  A  A    Add to shopping cart   
 22  HN17   7.60  6.50  5.40  4.90  A  A    Add to shopping cart   
 22  HN25   19.00  15.80  14.30  11.25  A  A    Add to shopping cart   
Small orders: Payments from foreign countries result in additional bank charges, therefore we charge an additional lump sum of 15,- Euro for all foreign orders with a goods value less than 153,- Euro.

Please ask for our conditions of sale, delivery and payment in english and our export conditions for your country.