For best use of these holding systems it is recommended not to insert them flush into a steel housing, but to leave them projecting by about 2 mm. It is also sufficient to countersink the space around the system with a clearance of about 3 to 4 mm width. A sleeve made from unmagnetised material, e.g. aluminium, brass or plastic is also recommended. If it is only possible to install them in steel directly, a holding force reserve of 30% must be considered when determing the size.
The deep pot holding magnets maintain their holding force indefinitely and do not age. They can only be weakened by strong magnetic fields. With a rise in temperature the holding force only decreases by approx. 10% per 100 °C reversibly.
With the increase of the air gap or roughness on the holding surface the holding force is rapidly reduced. With an air gap of 1 mm only about 20% of the intended holding force remains.
Armament: Circular rods made of precision-cast AINiCo 500.
|All dimensions in mm
*1 The total length L may be shortened by dimension B without decreasing the holding force. Holding surface can be ground to 2 mm deep.
|*2 The holding forces are minimum values which are reached when the magnet rests directly on the surface of a low carbon steel part, e.g. St 37, minimum thickness 3 mm and no air gap, and is lifted off vertically.|
|Prices /pc. ex works Berlin plus packing, VAT only in Germany
(A = Please ask for price)
|Catalogue page||Type||1 - 19||20 - 49||50 - 99||100 - 199||200 - 499||500 - 1000|
|24||G01||3.30||2.15||1.75||1.40||1.30||A||Add to shopping cart|
|24||G02||3.45||2.30||1.90||1.50||1.45||A||Add to shopping cart|
|24||G03||3.50||2.50||2.00||1.60||1.55||A||Add to shopping cart|
|24||G04||4.10||2.75||2.20||1.80||1.75||A||Add to shopping cart|
|24||G05||4.70||3.30||2.80||2.35||2.20||A||Add to shopping cart|
|24||G06||5.65||4.20||3.70||3.15||2.95||A||Add to shopping cart|
|24||G07||8.40||6.70||6.00||5.40||4.95||A||Add to shopping cart|
|24||G08||13.00||10.80||10.00||9.70||9.30||A||Add to shopping cart|
|24||G01T||3.90||2.60||2.10||1.70||1.55||A||Add to shopping cart|
|24||G02T||4.10||2.70||2.25||1.85||1.70||A||Add to shopping cart|
|24||G03T||4.50||2.80||2.35||1.95||1.80||A||Add to shopping cart|
|24||G04T||4.90||3.10||2.60||2.10||2.05||A||Add to shopping cart|
|24||G05T||5.40||3.90||3.30||2.80||A||A||Add to shopping cart|
|24||G06T||6.20||4.70||4.00||3.30||A||A||Add to shopping cart|
|24||G07T||9.30||7.10||6.45||6.00||A||A||Add to shopping cart|
|24||G08T||13.90||11.50||10.60||10.10||A||A||Add to shopping cart|
|Small orders: Payments from foreign countries result in additional bank charges, therefore we charge an additional lump sum of 15,- Euro for all foreign orders with a goods value less than 153,- Euro.
Please ask for our conditions of sale, delivery and payment in english and our export conditions for your country.