IBS Magnet - German
IBS Magnet - English
0
  article(s) | €  
0,00

Holding magnets with electrical switch-off

The permanent magnet system of these holding magnets creates a magnetic field between the centre pole and the outer border of the holding surface. In addition to the permanent magnet, which creates the holding force, a coil is installed. When 24 V= is applied to this switch-off coil a counterpole magnetic field is set up to neutralise the permanent magnetic field. As a result workpieces can easily be removed. These holding magnets will preferably be used when long-term holding times are required and tools should be loosened by switching on the coil for a short period.
PRODUCT DESCRIPTION

Installation: Fixing by inner thread on the reverse side. Observe the thread depth. When installing flush in steel a case made of non-magnetisable material (e.g. brass) is required, or the holding area has to project from the surface (thickness of the case wall or projection corresponding to the thickness of the outer pole).

Turning-on duration: The holding magnets are made for 25 % TD at a duration of = 2 min. or 40 % TD at = 0.5 min. In maintaining the turning-on duration the remaining holding force amounts to max. 3 % of the nominal force.

You can increase the holding force by reversing of the electric polarity and switching on the coil for a short period

Turning on duration (TD) =Turning on duration
Duration
x 100

Operating voltage of switch-control coil:
24 V = / + 5 % ... - 10 %

Connection to switch-control by free wire ends:
red + / blue -

MAGNETIC HOLDING WITH ELECTRICAL SWITCH-CONTROL
TypeHolding surface
Ø a (- 0,1)
Holding force*bØ cØ dfgiInput
power
WeightMinimum
thickness
Nkp
SE2*20,040,04,022,09,018,0M45,01,03,6 W37,0 g2,5 mm
SE335,0160,016,028,011,233,0M45,02,04,6 W200,0 g3,0 mm
SE555,0420,042,036,018,052,0M56,02,09,0 W500,0 g4,5 mm
SE770,0720,072,045,024,065,6M88,02,013,3 W900,0 g6,0 mm
SE990,01200,0120,048,030,084,7M88,02,021,8 W1,7 kg7,5 mm
SE15150,03500,0350,063,055,0140,0M1616,03,044 W6,4 kg12,5 mm

All dimensions in mm.
 
*Only Type SE2 – cable outlet in the middle of scope
ORDER LIST
Prices /pc. ex works Berlin plus packing, VAT only in Germany
(A = Please ask for price)
Catalogue page Type 1 - 19 20 - 49 50 - 99 100 - 199 200 - 499 500 - 1000  
 34  SE2   69.00  64.00  62.00  A  A  A    Add to shopping cart   
 34  SE3   80.00  74.00  68.50  A  A  A    Add to shopping cart   
 34  SE5   132.00  120.00  105.00  A  A  A    Add to shopping cart   
 34  SE7   215.00  209.00  195.00  A  A  A    Add to shopping cart   
 34  SE9   305.00  A  A  A  A  A    Add to shopping cart   
 34  SE15   589.00  A  A  A  A  A    Add to shopping cart   
MAGNETIC HOLDING RAIL WITH ELECTRICAL SWITCH-CONTROL
Elektrischer Anschluss erfolgt an
2 Anschlussschrauben Schutzart IP00
TypeHolding surfaceHolding force*Input
power
WeightMinimum
thickness
Nkp
LE8200 x 60153015040 W3,0 kg10 mm
* The holding forces depend on the minimum thickness of the magnet layer, a 100 % contact of the magnet holding surface area and zero air gap on an even surface with vertical pulling force at a warm operating temperature.
ORDER LIST
Prices /pc. ex works Berlin plus packing, VAT only in Germany
(A = Please ask for price)
Catalogue page Type 1 - 19 20 - 49 50 - 99 100 - 199 200 - 499 500 - 1000  
 34  LE8   795.00  A  A  A  A  A    Add to shopping cart